Paxar Monarch AAFES - Manual (Page 16)

2-6 User Manual
Printing a Test Label
The test label shows the printer settings. Refer to your
Equipment Manual for more information.
1. From the Config Menu, press
← or → until you see
9. Print test label
2. Press Enter. You briefly see
Command Sent
A test label prints and you return to the Config Menu.
Setting the Packet Delay
This function adjusts the delay between processing MPCL packets so
the printer does not lock up.
Note: Call Service before changing the Packet Delay setting.
The default setting should work for most packets.