Panasonic KX-TD612NZ - Manual (Page 197)

Customising Your Phone & System
User Manual 197
4.1.2 Initial Settings
The original settings are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
• If nothing is entered within 1 minute in the programming mode, the mode returns to the
normal status.
• To exit the mode at any time, lift the handset.
Pressing the One-Touch
Dialling button.
Which line do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line Assignment
- Outgoing)
To continue
To exit To program To enter the programme mode
programming
input
9 9
Dial 99. Press STORE. Follow programming
input.
Press PROGRAM. Press PROGRAM.
Item Selection Programming Input
1 1
1 2
1 3
1
No line
An idle outside line
A pre-assigned outside line
2 1
2 2
2 3
No line
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line Assignment
- Incoming)
A pre-assigned outside line
A ringing line
The Intercom line
3 1
3 2
Which way do you prefer to
dial the One-Touch Dialling
feature?
(Full One-Touch Dialling
Assignment)
Going Off-hook and then pressing
the One-Touch Dialling button.
(1-4)
Outside line no.
(1-4)
Outside line no.
AUTO DIAL
STORE
PROGRAM
PROGRAM
INTERCOM