Patton electronic 2616RC - Manual (Page 46)

Using a browser to complete Model 2616RC configuration 46
Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation
5. Under Dev Num B , select port1(1) .
6. Under Dev Slots B , enter 1 - 32 .
7. Under Dev Type B , select fromH110 .
8. Under Dev Num B , select port1(1) .
9. Under Dev Slots B , enter 32 - 62 .
10. Click the Submit Query button.
Card 2 mapping
1. Under Dev Type A , select t1-e1(1) .
2. Under Dev Num A , select port10(10) .
3. Under Dev Slots A , enter 1 - 32 .
4. Under Dev Type B , select fromH110 .
5. Under Dev Num B , select port1(1).
6. Under Dev Slots B , enter 1 - 32 .
7. Under Dev Type B , select toH110 .
8. Under Dev Num B , select port1(1) .
9. Under Dev Slots B , enter 32 - 62.
10. Click the Submit Query button.
Configuring line settings and signaling for E1
Accessing the Line Interface Settings
1. On the 2616RC Configuration Menu, click the T1/E1 Link hyperlink to open the T1/E1 LINK ACTIV-
ITY OVERVIEW page (see figure 35 ).
Figure 35. T1/E1 Link Activity Overview page