Patton electronic 2616RC - Manual (Page 53)

Saving your configuration 53
Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation
Saving your configuration
At this point you have completed the basic configuration of your T-DAC for operation. To save your configu-
ration settings in non-volatile RAM, do the following:
1. On the Configuration Menu click the Select HOME hyperlink to open the 2616RC Configuration Menu
home page ( figure 50 ).
Figure 50. 2616RC Configuration Menu home page
2. Click the Record Current Configuration button (see figure 50 ).
Note All configuration settings will be lost unless you click on the Record Cur-
rent Configuration button before you power down or reset the T-DAC.
Backing up your configuration parameters
The 2616RC T-DAC provides Import/Export functions. These functions enable you to back up (export) and
restore (import) your T-DAC’s configuration parameters against possible failure. Should your T-DAC ever
need replacing, a previously saved copy of your (exported) configuration file can quickly be loaded (imported)
into a replacement T-DAC.
Note Import/Export functions require superuser access privileges.
Note The parameters that will be exported are the power-up settings as they
are stored in flash memory and may not be the current operating
parameters. To ensure that you export the most current parameters,
go to HOME, then under Operator Actions, click on the Record Cur-
rent Configuration button.