Philips LTC 2600 - Manual (Page 24)

24
4.7 Configure Setups
The LTC 2600 Series multiplexer has the capability to provide up to six individually configured setups that are
retained in the multiplexer memory. By using these setups, the multiplexer can be programmed to automatically
change its mode of operation based on a timer setting. This allows different configurations to be used (e.g. day,
night, weekend and holidays).The timer provides seven days of programming with six individual programmable
windows per day. The following options can be programmed for each Setup:
Load Setup
• The setup can be configured and then loaded into memory.
Copy Setup
• A setup can be copied and then saved as another setup.
Setup Title
• Each setup can have an individual title of 12 characters. (This title will displayed on line two of the multiplexer
menus).
Time Events
• The Time Event function in the Configuration Setup menu allows each of the six setups to be programmed for
several parameters including: start time, duration, and frequency (daily schedule) of recording. A sample menu is
shown below. Note that these parameters must be set for each setup (1-6.)
The setup program can be set to run only once. This allows for individual events to be programmed and then run
only one time. After the event, the multiplexer reverts to its "normal" programmed setup(s).
4.8 Configure Display
The monitor displays can be configured to show time/date and camera titles.The format of the text can be
changed, as well as the border of the cameo picture.
• Time/Date: Each monitor can have the time/date display selected on or off. Note that the time and date are
only displayed per screen and not per cameo picture.
• Text: Each monitor can have the camera title display selected on or off. This ensures that the text can be
viewed regardless what type of background is shown, (i.e. very dark backgrounds can have white text displayed).
The text can be displayed in a number of formats as shown in the following chart.
Background Text
Clear White
Clear Gray
Clear Black
White Clear
White Gray
White Black
Gray Clear
Gray White
Gray Black
Black Clear
Black White
Black Gray
LTC 2600 Series Section 4 Advanced Programming
TIME EVENTS
SETUP 1
>SETUP ON/OFF
ON
START TIME 12:00AM
DAYS SMTWTFS
RUN ONE TIME ON
RECORD ON
Choose:SELECT More:V
Exit:ZOOM