Philips LTC 2600 - Manual (Page 35)

35
LTC 2600 Series Appendix C: Factory Default Settings
ITEM DEFAULT OPTIONS
DATE/TIME:
Date
01/01/1998
Time 12/00/00
Time Format 24 H 12 hr, 24 hr.
Date Format dd/mm/yy (PAL) mm/dd/yy dd/mm/yy yy/mm/dd
mm/dd/yy (NTSC)
VCR SETUP:
Time Lapse
3 Hr (PAL) PAL: 3 to 720 hrs. or as programmed.
2 Hr (NTSC) NTSC: 2 to 720 hrs. or as programmed.
Record List 01-16, 01-16. Any camera in a 32 camera sequence. i.e. 1,5,8,4,2,3,4
Playback Format LTC2600 LTC2600,TC8298B, 7-bit, 12-bit
Record Format LTC2600 LTC2600,TC8298B
Record Lock ON
(standard duplex models) OFF, ON
OFF (all others)
VEXT OFF OFF, ON for both VCR OUT and MON B.
CREATE VCR SETUP:
VCR Title
VCR SETUP 1
VCR/Field Table 3 Hr (PAL) PAL: 3 to 720 hrs. or as programmed.
2 Hr (NTSC) NTSC: 2 to 720 hrs. or as programmed.
VCR OUTPUT
Output
OFF OFF, ACT, ALM, ACT/ALM
Output Relay N/C N/O, N/C
ALM/ACT Speed 3 (PAL) 3 to 720 hrs.
2 (NTSC) 2 to 720 hrs.
Alarm Record INTERLEAVE INTERLEAVE, Exclusive
Action Record INTERLEAVE INTERLEAVE, Exclusive
ALARM SETUP:
Alarm Dwell
5 sec 3 - 60 sec. FOLLOWS
Alarm List all off Select any camera
Alarm Inputs N/O N/O, N/C
Manual Reset ENABLE ENABLE, DISABLE
Camera History OFF ON,OFF
Beeper DISABLE ENABLE, DISABLE
ACTION SETUP:
Action Dwell
5 sec 3 - 60 sec.
Action List all off
Action Zones ON Except Outer ON/OFF (All Zones)
Rows (1/16 of video) for System4 models
Walkthrough MED, 10 MIN, LOW, MED, HI (1, 150) System4 only
Manual Reset ENABLE ENABLE, DISABLE
Camera History OFF ON,OFF
Beeper DISABLE ENABLE, DISABLE
APPENDIX C: FACTORY DEFAULT SETTINGS