Philips MX5800SA/22S - Manual (Page 42)

42
English Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 10).
Selecting surround sound
● Press SURROUND (SURR.) to select :
MULTI-channel, 3D SOUND or STEREO.
➜ The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜ The centre and surround speakers
operate only when the DVD home
cinema system is set to Multi-channel
mode.
➜ The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround and
Dolby Pro Logic.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
– You are not able to select the surround
sound mode if the system menu/menu bar is
turned on.
Turning on / off clear voice effect
You can enhance the centre and surround
sound outputs by activating the clear
voice sound feature if you have selected
Multi-channel as the surround mode.
● Press VOICE on the remote to select
“
CLEAR VOICE ON”.
➜ To turn off the setting, press VOICE
again to select “ CLEAR VOICE OFF”.
Changing subwoofer volume level
● Press SUB +/- on the remote to
adjust subwoofer volume level (-6dB to
+6dB).
Adjusting Bass / Treble level
The BASS (low tone) and TREBLE (high
tone) features enable you to define the
sound-processor settings.
1
Press BASS or TREBLE.
➜ The level indicator appears.
2
Within five seconds, use the VOLUME
control to adjust the Bass or Treble level
(-3 to +3).
➜ If the volume control is not used
within five seconds, it will resume its
normal volume control function.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
● Press SOUND on the remote.
When playing movie discs, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output,select CONCERT or
CLASSIC.
Volume control
● Adjust VOLUME control (or press
VOL +/-on the remote) to increase
or decrease the volume level.
➜ " VOL MIN" is the minimum volume
level and “ VOL MAX” is the maximum
volume level.
To listen through the headphones
● Connect the headphones plug to the n
socket at the front of the DVD system.
➜ The speakers will be muted.
To turn off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound
and " MUTE" appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
Sound and Volume Controls