Detailed description of set-up menus, Video – Panasonic AJ-LT85P User Manual

Page 32

Advertising
background image

VIDEO

Item

Setting

Description of setting

No.

Item

No.

Item

600

INPUT C

0000

B/W

KILL

0001

AUTO

™ ™

601

OUT

0000

N-VF

VSYNC

0001

VF

602

V-MUTE

0000

N-MUTE

SEL

0001

LOW_RF

™ ™

603

CC (F1)

0000

BLANK

BLANK

0001

THRU

™ ™

604

CC (F2)

0000

BLANK

BLANK

0001

THRU

™ ™

605

FREEZE

0000

FIELD

SEL

0001

FRAME

™ ™

606

IN FRM

0000

FORCE

DET

0001

AUTO

™ ™

607

VIN SETUP

0000

THRU

0001

CUT

™ ™

608

VOUT SETUP

0000

THRU

0001

ADD

™ ™

The underlined number and item are the factory settings.

DETAILED DESCRIPTION OF SET-UP MENUS

32

This selects the color killer processing for the video input signals.
0: B/W processing is conducted forcibly.
1: Automatic processing is conducted.

This selects whether the internal sync signal is to be floated so that H is
aligned with the video output signal and V is aligned with the video input sig-
nal during EE.
0: Internal sync signal is not floated.
1: Internal sync signal is floated.

This selects where the video signals are to be muted during playback under
low RF conditions or when the servo lock is disengaged.
0: Signals are not muted.
1: Signals are muted.

This selects ON or OFF for the closed caption signal in the first field.
0: Signal is forcibly blanked.
1: Signal is not blanked.

This selects ON or OFF for the closed caption signal in the second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.

This selects freeze for the still picture either during play or when operation is
transferred from play to stop.
0: Field freeze
1: Frame freeze
(Field freeze is set at all times when the laptop is in a mode other than the
one mentioned above.)

This selects frame detection for the input signals.
0: Frame detection is conducted at all times.
1: Frame detection is prohibited only with NON-STD signals.

This selects the 7.5% setup processing for the input composite signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.

This selects the 7.5% setup processing for the output composite signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.

V

V

T

T

R

R

1

2

Advertising