Panasonic AJ-LT85P - Manual (Page 63)

Make these 3 cables
equally long.
VIDEO
OUT VIDEO
OUT
REF (BB)
P1 IN P2 IN
REF IN
RECORDER OUT
MONITOR OUT
75
Ω
Switcher
TV
monitor
WFM
(waveform monitor)
VSC
(vectorscope)
PLAYER PLAYER
Sending out
the signals
REF
(BB) REF
(BB)
REF
VIDEO IN
REF
VIDEO IN
VTR 1 VTR 2 VTR 1 VTR 2
The video signals (ENCODER OUT) must be adjusted upon completion of the system connections before any signals are trans-
mitted in order to conduct accurate error-free editing.
(This adjustment may have to be repeated whenever a connecting cable is replaced or the connections changed.)
To adjust the encoder using the laptop:
! Connect the units as shown below.
If a waveform monitor and vectorscope are unavailable, observe the images on a monitor and adjust to eliminate any
color shifting.
ENCODER ADJUSTMENTS
63
Encorder
adjustments
q Supply the external reference
signals to the units from a sync
signal generator.
w Connect composite video sig-
nals.
VIDEO
LEVEL SET UP HUE CHROMA
LEVEL
H FINE COARSE
SYSTEM SC