Pioneer RCS-606H - Manual (Page 131)

The Initial Setup menu 15
131
En
English
Dolby Digital Out Dolby Digital • Output a Dolby Digital signal when a Dolby Digital source is being played.
Dolby Digital
PCM
Convert Dolby Digital sources to Linear PCM output. Use if your connected
equipment doesn’t have a Dolby Digital decoder.
DTS Out On • Output a DTS signal when a DTS source is being played.
Off Switch off the digital output when a DTS source is being played. Use when your
connected equipment doesn’t have a DTS decoder. In this case, use the analog
audio outputs.
96 kHz PCM Out 96 kHz 48 kHz • Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected
equipment doesn’t support 96 kHz sampling rate.
96 kHz Output 96 kHz digital audio when a 96 kHz source is being played.
MPEG Out MPEG Output an MPEG audio signal when a source using MPEG audio is being played.
MPEG PCM • Convert sources with MPEG audio to Linear PCM output. Use if your connected
equipment doesn’t have an MPEG audio decoder.
Audio DRC On Switches on Audio DRC (Dynamic Range Control). Use when listening to Dolby
Digital material at low volume.
Off • Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital. In this case adjust the
dynamic range from the receiver subwoofer—see Dynamic Range Control on page 32.
Language
OSD Language English • Sets the language of the on-screen displays to English.
available languages Choose from the languages displayed for the on-screen displays.
Audio Language English • Sets the default audio language for DVD-Video playback to English.
available languages Choose from the languages displayed to set the default audio language for DVD-
Video playback.
Other Select to set the default audio language to something other than the ones listed.
See
Selecting other languages for language options on page 135.
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.
Subtitle Language English • Sets the default subtitle language for DVD-Video playback to English.
available languages Choose from the languages displayed to set the default subtitle language for
DVD-Video playback.
Other Select to set the default subtitle language to something other than the ones
listed. See
Selecting other languages for language options on page 135.
Discs do not necessarily have subtitles in your selected menu language. Also, some discs override the Subtitle Language preference.
Auto Language On • On this setting:
• DVD-Video discs whose main audio track is in your default language will play
using that language, without subtitles.
• Discs whose main audio track is not in your default language but that have a
subtitle track in your default language will play the original audio track with sub-
titles.
Off Select to play DVD-Video discs according to your audio and subtitle language
preferences.
For Auto Language to be effective, the Audio Language and Subtitle Language options must be set to the same language.
Setting Options Explanation