Pioneer RCS-606H - Manual (Page 27)

Listening to your system 03
27
En
English
Using the Sound Retriever
When audio data is removed during the MP3 or WMA
compression process, sound quality often suffers from
an uneven sound image. The Sound Retriever feature
employs new DSP technology that helps bring CD quality
sound back to compressed 2-channel audio by restoring
sound pressure and smoothing jagged artifacts left over
after compression.
Tip
• This feature is effective when used together with the
Jukebox function of the DVD recorder.
• While listening to a stereo source, press SOUND
RETRIEVER .
Press repeatedly to switch between:
• RTRV ON — Switches the Sound Retriever on.
• RTRV OFF — Switches the Sound Retriever off.
Listening with Acoustic Calibration
EQ
You can listen to sources using the Acoustic Calibration
EQ set in
Using the Auto MCACC setup for optimal
surround sound on page 23.
1 Press SOUND.
2 Use the / buttons to select MCACC EQ then
press ENTER.
3 Use the / buttons to switch EQ ON or EQ OFF
then press ENTER to confirm.
• On the EQ OFF setting, equalization is set to off and
speaker settings (channel delay and channel level)
remains as it is set.
• Acoustic Calibration EQ is set to on automatically
after Auto MCACC setup is used.
Enhancing dialogue
The Dialogue Enhancement feature is designed to make
the dialogue stand out from other background sounds in
a TV or movie sound track.
1 Press SOUND.
2 Use the / buttons to select DIALOGUE then
press ENTER.
3 Use the / buttons to select the amount
dialogue enhancement then press ENTER to confirm.
Select between
OFF, MID or MAX.
Using Quiet and Midnight listening
modes
The Quiet listening feature reduces excessive bass or
treble in a sound source.
The Midnight listening feature allows you to hear
effective surround sound of movies at low volume levels.
1 Press SOUND.
2 Use the / buttons to select TONE then press
ENTER.
3 Use the / buttons to select QUIET or
MIDNIGHT then press ENTER to confirm.
• To cancel the Quiet or Midnight listening modes,
select BASS/TRE.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall
tone.
1 Press SOUND.
2 Use the / buttons to select TONE then press
ENTER.
3 Use the
/ buttons to select BASS/TRE then
press ENTER.
• Selecting BASS/TRE cancels the Quiet and Midnight
listening modes. These modes cannot be used at the
same time.
4 Use the / buttons to select BASS or TREBLE;
use the / buttons to adjust the sound then press
ENTER to confirm.
RECORDER
HDD/DVD
PAUSE PLAY STOP
REC STOP REC INFO HELP
FM/AM
SOUND
RETRIEVER AUDIO IN
RECEIVER
SET UP
MCACC
SURROUND ADVANCED SOUND TV/DVD
SLEEP
INPUT
MAIN SUB
CHANNEL
TV CONTROL RDS DISP
AXD7442
VOLUME DISPLAY
CLEAR JUKE BOX
TEST TONE VIDEO IN
SR + ONE TOUCH COPY
MENU ENTER
/ / TIMER REC REC MODE
1 2 3
4 5 6
7 8
0
+ +
– –
9