Pioneer RCS-606H - Manual (Page 5)

Speaker Setup Guide
5
En
English
Chapter 2
Speaker Setup Guide
Safety precautions when setting up
When assembling the speakers, lay them down flat on
their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing
the speakers.
Home theater sound setup
(RCS-606H)
• This is a standard multichannel surround sound
speaker setup for optimal 5.1 channel home theater
sound.
1 Attach the speaker stand bases to the stems
using the screws provided.
Once you have aligned the stem and base, secure with
the small screws at the points shown below. Note that
the speaker should face in the direction of the base of the
isosceles triangle (outlined below).
2 Attach the smaller non-skid pads to the base of
the center speaker. The large non-skid pads are for
the front and surround speakers, and the receiver
subwoofer (as shown).
Use the adhesive side of the pads to attach them to the
base (flat surface) of each speaker.
Front
left
Receiver subwoofer
Front
right
Surround
left
Surround
right
Center
Listening position
Rear
Front
Non-skid pads
(large) x 4
Non-skid pads
(small) x 4
Non-skid pads
(large) x 16
Center speaker
Receiver
subwoofer
Front and
surround
speakers