Selecting the, Dte drop/insert or data port for led display – Paradyne 3160 User Manual

Page 46

Advertising
background image

Operation

3-12

3160-A2-GB21-80

March 1999

Selecting the DTE Drop/Insert or Data Port for LED
Display

Use the LED command on the Control branch to select which port’s (DTE
Drop/Insert or data port) status appears on the five shared LEDs on the front
panel.

"

Procedure

To select a port for LED display:

1. From the top-level menu screen, press the

key until the Ctrl selection

appears on the screen.

2. Select Ctrl.

3. From the Control screen, select LED.

F1

Control:
Call

Rel

LED

F2

F3

The currently selected port name appears on the top line of the LCD. DTE
indicates the DTE Drop/Insert (DSX-1) port.

F1

LED Dsply: DTE
DTE

Prt1

Prt2

F2

F3

4. From the LED Dsply screen, press the Function key that corresponds to the

DTE Drop/Insert (DSX-1) or data port for which you want the LEDs to display.
Use the scroll keys, if necessary.

Select DTE to monitor the DTE Drop/Insert (DSX-1) port’s SIG, OOF, ALRM,
PDV, and BPV status signals on the shared LEDs.

Select a particular data port to monitor the data port’s DTR, TXD, RXD, CTS,
and RTS control signals on the shared LEDs.

Advertising
This manual is related to the following products: