7 receiving a fax manually – auto answer off, 1 activating tel mode, 8 using the unit with an answering machine – Panasonic CM0310DY0-CD User Manual

Page 47: 1 setting up the unit and an answering machine, Receiving a fax manually – auto answer off, Using the unit with an answering machine

Advertising
background image

6.7 Receiving a fax manually –
Auto answer OFF

R A4 or letter size recording paper can be used.
R Use this mode with an extension telephone.

6.7.1 Activating TEL mode

Press MFax Auto AnswerN repeatedly to display “TEL
MODE”
.
R The MFax Auto AnswerN light turns OFF.

Note:
R If you do not answer the call within 10 rings, the unit

will temporarily switch to fax reception. The other
party can then send a fax.

How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset

of the extension telephone.

2. When:

– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press MGN MBN M9N (default fax activation code)
firmly.

3. Replace the handset.

Note:
R To stop receiving, see page 72.
R To receive fax documents using the extension

telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.

6.8 Using the unit with an
answering machine

6.8.1 Setting up the unit and an answering
machine

1

Connect the answering machine (A).
R Answering machine is not supplied.
R Remove the stopper (B) if attached.

A

B

2

Set the number of rings on the answering machine to
4 rings or less.
R This will allow the answering machine to answer

the call first.

3

Record a greeting message on the answering
machine.
R We recommend you record a message up to 10

seconds long, and not to pause for more than 4
seconds during the message. Otherwise, neither
machines will function correctly.

4

Activate the answering machine.

5

Set the unit to the desired receiving mode (page 46).
R If you set to FAX ONLY mode, change the ring

count in FAX ONLY mode to “5 EXT. TAM”
(feature #210 on page 57).

6

Make sure each of the following is unique:
– the remote access code of the answering

machine

– the fax activation code (feature #434 on

page 61)

47

6. Fax (KX-MB2030 only)

Advertising
This manual is related to the following products: