Panasonic CM0310DY0-CD - Manual (Page 55)

9.2 Basic features
Feature/Code Selection
Setting the quick setup
MBNM1NM0NM0N
(KX-MB2030 only) You can print out the quick fax setup guide and select the desired receiving
mode depending on your situation.
M1N “FAX ONLY” (default): Use only as a fax (page 46).
M2N “DIST. RING”: With the Distinctive Ring service (page 53).
M3N “EXT. TAM”: With an external telephone answering machine (page 47).
M4N “EXT. TEL”: Mostly phone calls (page 47).
1. MMenuN A MBNM1NM0NM0N
2. MSetN
3. Press MSetN again to print the quick fax setup guide.
R If you do not wish to print it, press MStopN.
4. Press M1N to M4N to display the desired setting.
5. MSetN A MMenuN
Setting the date and time
MBNM1NM0NM1N Enter the date and time using the dial keypad. See page 22 for details.
Setting your logo
MBNM1NM0NM2N
(KX-MB2030 only) Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
MBNM1NM0NM3N
(KX-MB2030 only) Enter your fax number using the dial keypad. See page 23 for details.
Selecting the language
MBNM1NM1NM0N The display and reports will be in the selected language.
M1N “ENGLISH” (default): English is used.
M2N “SPANISH”: Spanish is used.
1. MMenuN A MBNM1NM1NM0N
2. Press M1N or M2N to select the desired language. A MSetN A MMenuN
Setting the dialing mode
MBNM1NM2NM0N
(KX-MB2030 only) M1N “PULSE”
M2N “TONE” (default)
See page 18 for details.
Setting flash time
MBNM1NM2NM1N
(KX-MB2030 only) The flash time depends on your telephone exchange or host PBX.
M0N “900ms”
M1N “700ms” (default)
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms”
MGN “90ms”
MBN “80ms”
Note:
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
MBNM1NM4NM5N M1N “NORMAL” (default)
M2N “DARKER”
55
9. Programmable Features