Paxar 656 / 636 - Manual (Page 105)

Users Manual Model 656/636 Optional Stackers • 99
4.25” Stacker Specifications
• 4.25” Web x 1 ¾” Feed
• Will work on 636, 656 & 676
• Old machines may require the knife strut to be replaced with one that has a mount hole – Part number 355018.
• Fabric and heat seal only - not for pressure sensitive or tags.
• Stack height dependent on material size and weight. (may not reach full stacker height)
• Jam sensor will require relocating the LED to the center position for the 676 and back set of holes for the 636 & 656.
• If changing from standard stacker to 4.25” stacker - the knife guard must be changed to match the stacker being used.