Motherboard power connectors – Paxar 656 / 636 User Manual
Page 50
44
• Electrical Connections
Users Manual Model 656/636
Motherboard Power Connectors
The power supply connector on any PC / XT or PC / AT compatible motherboard is
made up of dual six-pin male connectors. Two female connectors from the power
supply plug directly onto these male connectors. The following diagrams illustrates
the proper method of attaching the connectors.
Ensure that all of the black wires are located next to each other in the center of the
two connectors (as shown in the diagram below), and that the clamps on the back
side of the connectors ate secured along the PCB header. All pins should be covered.
Warning: Connecting the power supply incorrectly may cause irreversible
(unwarranted) damage! Ensure that the power is turned off before connecting the
power supply. Make certain that the 115 / 230VAC fuse drawer is in the correct
position.