Main unit (front), Main unit (rear), If the front cover comes off – Panasonic SC-BTT750 User Manual
Page 7: Power-saving features, Getting s tar te d
Getting s
tar
te
d
7
VQT2W18
1
Standby/on switch (POWER
Í/I) (> 18)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2
Power indicator
The indicator lights when this unit is turned on.
3
Connect iPod/iPhone (
> 32)
4
Adjust the volume of the main unit
5
Open or close the disc tray (
> 21)
6
Disc tray
7
SD card slot (
> 21)
8
Display (FL display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
9
Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
o
up and down, 30
o
left and right
10 Select the source (
> 22)
11 Stop (
> 24)
12 Start play (
> 24)
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
1
AC IN terminal (
> 18)
2
Speaker terminals (
> 13)
3
Cooling fan
4
HDMI AV OUT terminal (
> 15)
5
LAN port (
> 16)
6
[BTT750] USB port for supplied wireless adaptor (> 16)
[BTT350] USB port for optional wireless adaptor (> 16)
7
AUX terminal (
> 14)
8
VIDEO OUT terminal (
> 14)
9
FM radio antenna terminal (
> 13)
10 DIGITAL AUDIO IN terminal (
> 14 , 15)
11 Digital transmitter dock for optional wireless system (
> 12)
Main unit (Front)
OPEN/CLOSE
VOLUME
POWER
iPod
SELECTOR
SD CARD
1 2
3
4
5
6
7
8
9 10
11 12
Pull open.
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
≥ Automatic FL display turn-off function
The main unit's display is automatically turned off when the
volume is adjusted to “0”. (
> 37)
≥ Automatic power-down function
The main unit will automatically switch to standby mode after
30 minutes if the main unit is inactive as follows.
e.g.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
Main unit (Rear)
A
5
2
1
FRONT SURROUND
CENTER
R
L
-
LAN
DC OUT
5V
500mA
AV
OUT
AUX
LAN
WIRELESS
OPTICAL
(STB/TV)
DIGITAL AUDIO IN
DIGITAL TRANSMITTER
FM ANT 75
(
)
+
C IN
6
SUBWOOFER
SPEAKERS
6
3
6
4
3
R
L
3
(ARC)
L
R
VIDEO
OUT
1
2
3
4
5
6
7
11
8 9
10
SC-BTT750_350P_VQT2W18_eng.book 7 ページ ２０１０年６月２１日 月曜日 午後４時５１分