Panasonic TQBJ0303-1 - Manual (Page 19)

Switching the projector on/off
E
NGLISH - 19
Basic Operation
Switching the projector on/off
Mains lead
Be sure to fix the mains lead to the projector with the provided “Power cord secure lock” to prevent the
mains lead from coming off.
Connect the provided mains lead securely.
For details, see “Precautions with regard to safety”. ( Æ pages 6 - 10)
J
Connecting
1 ) Make sure the shape of the mains plug
and the AC IN terminal on the back
of the projector match, then push the
plug all the way in.
2 ) Align the side of the power cord secure
lock with the side guide rail of the AC IN
terminal of the projector and slide it in.
Rail guide
3 ) Place the latch to the latch catcher and
press until it clicks.
Latch
4 ) Connect the mains lead to a mains
socket.
J
Disconnecting
1 ) Unplug the mains lead from the mains
socket.
2 ) Depress the latch and slide the cover
off.
Latch
3 ) Slide the power cord secure lock up
along the side guide rail and remove.
Rail guide
4 ) Hold the plug and unplug the mains
lead from the AC IN terminal on the
back of the projector.
Direct power off function
J
You can switch off the electric power supply any time by unplugging the mains plug from the mains
socket or by switching off the main power. The internal lamp cooling fan keeps operating by the internal
power supply, and stops automatically when cooled enough.
Note
Do not put the projector into the carrying bag with the z POWER indicator lit.
Direct power on function
J
If INITIAL START UP in the PROJECTOR SETUP menu is set to ON, connect the mains lead to a mains
socket and the projection will start even when the control panel is disabled or the POWER button is
locked. ( Æ page 39)