Panasonic KX-TDA100 - Manual (Page 24)

Using the Handset Phonebook
24
Storing an Item Using the Outgoing Call Log
Storing a Handset Phonebook Number as Hot Key Dial
A phone number stored in the Phonebook can be assigned as a Hot Key.
• To enter characters, see page 25.
• * The valid digits are “0” through “9”, “
”, “#”, “P ( )” and “F ( )”.
• * Although up to 200 Phonebook items can be stored, each phone number
stored in the Phonebook that contains over 24 digits counts as two Phonebook
items.
• * If there is only one Phonebook memory location available left, you cannot store
a phone number that is over 24 digits long.
• To change a character or digit, move the joystick to highlight it, press
to delete it, then enter the new character or digit.
• To clear an entire line, press for more than 1 second.
• To move the cursor to the left or right, move the joystick or , respectively.
• A “ ” will be displayed next to hot key numbers that have a Phonebook item
registered to them.
RCL
FLASH
CLR
CLR
name
phone no.
category no.
Select the
desired item. Press the
Joystick.
Press the
Joystick.
Select “Save
Phonebook
”.
Press the
Joystick. Enter a name, phone number, and
select the category number (1-9) or Off.
Press the Right
Soft Key
.
Press the Left
Soft Key.
Press the
Joystick.
Press the
Joystick. Select the
desired item.
Select a blank
hot key number (0-9).
Select “Regist.
Hot Key
”.
Press the
Joystick. Press the
Joystick.
Press the
Joystick.