Panasonic KX-TDA100 - Manual (Page 6)

Before Operating the Handset
6
Selecting the Fwd/DND Icon
When the handset is connected to a KX-TAW848/KX-TDA series (KX-TDA50/100/200)
PBX and the PT LED patterns for Fwd and DND have been set reversely on the PBX, you
should change this setting to Mode 2.
Enabling the Outgoing Call Log
The default setting is “Off” for the Outgoing Call Log. You can enable the Outgoing Call
Log if needed.
• Only the numbers you dial, or numbers dialed using Hot Key Dial or Phonebook
will be stored in the Outgoing Call Log.
Press the
Joystick. Select “Fwd/DND Icon”.
Press the Joystick. Press the Joystick.
Press the
Joystick.
Select “Mode 2”.
Select “ Setting
Base
”.
Press the
Joystick. Select “Other
Option
”.
Select
“Outgoing Log”. Press the
Joystick.
Press the
Joystick.
Select “On”.
Press the
Joystick.
Press the
Joystick. Enter your password.
(default: 1234)
Enter Password
----
Select “ Setting
Handset
”.