Panasonic KX-TDA100 - Manual (Page 9)

Before Operating the Handset
9
Adjusting the Vibrate Setting
Adjusting the Receiver/Speaker/Headset Volume
• You can receive an intercom call by the caller’s voice instead of rings (Voice
Call). For further information, refer to “Alternate Receiving—Ring/Voice” in the
user documentation for your PBX.
• To set Vibrate only, without ringing, turn Meeting Mode on or set the Ringer
Volume to off. (See page 8.)
Select the desired setting.
(Vib.& Ring / Vib. Ring / Off)
Select “Incoming
Option
”.
Press the
Joystick.
Press the
Joystick.
Press the
Joystick.
Press the
Joystick.
Press the
Joystick.
Select
“Vibrate”.
Select “
Setting Handset
”.
During a conversation
Move the Joystick UP or DOWN to adjust the volume.
(Receiver Volume-Level 1-4, Speaker Volume-Level 1-6, Headset Volume-Level 1-4)