Philips DVDR3588H/93 - Manual (Page 40)

E
n
g
li
sh
1
Setting a timer recording from an
external Cable Box/
Satellite Receiver
If you have a Satellite Receiver/Cable Box
connected to this recorder via the
VIDEO (CVBS) (see page 21,) follow the
steps described below to program the
recordings.
A Select the channel you want to record at
the Satellite Receiver/Cable Box.
B Program the recording with the required
information. Follow the steps
A
~
D
of
“Timer Recording (manually)” on the
previous page.
C Keep the Satellite Receiver/Cable Box
switched on for the recording.
D Press STANDBY-ON 2 to turn off
the recorder.
Changing/ Deleting a timer
recording
A Turn on the TV power. Select the
correct Video In channel at the TV.
B Press TIMER on the remote control.
 The timer schedule list appears.
1
2
3
4
5
6
Source Rec-Mode Date Start End Rec-To
Timer-Schedule
CH003 SP 31/01/05 21.33 HDD
FP-CVBS
CH008
EP
SP 25/04/05
30/01/05
16.00
10.00 DVD
HDD
22.03
17.30
11.15
Press [OK] to review a scheduled recording.Press [SELECT/CLEAR]
to clear entry.Press [TIMER] to exit.
C Use  keys to select a timer program
which you want to change/ delete.
D To delete the timer entry, press
SELECT/CLEAR on the remote
control.
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
Timer Recording
(continued)
E To change the timer schedule, press
OK to enter the timer editor menu of
the selected timer program.
F Select the entry field and make the
necessary changes.
G Once complete, select
OK OK
in the
menu and press OK to save the changes.
H Press TIMER to exit the menu.
Helpful Hint:
– The manual recording is priority when it
conflict with time recording, the task of time
recording will be deleted automatically.
Timer Editor
Rec To
Mode
Date
Start
End
HDD
Once
Source Ch003
31 / 01 / 0 5
21 : 3 3
22 : 0 3
Title M y T i t l e 0
Rec Mode SP
OK OK OK CANCEL
Select source for timer recording.
▲
▲▲
▲