Petsafe PDT00-12892 - Manual (Page 11)

www.petsafe.net 11
Clear 2 Dog Programming and Return to 1 Dog Mode
1. Set the Level Select Switch to 1.
2. Press and hold the Transmitter’s Dog Select Button continuously for 5 seconds, then
release the button. (The Red LED will blink 3 times when it is complete.)
Accessories
To purchase additional accessories for your PetSafe ® Remote Trainer, contact the
Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to
locate a retailer near you.