ProForm PFEX33790 - Manual (Page 11)

11
Inspect and tighten all parts of the PROFORM ¨ 965R
regularly. The 965R can be cleaned with a soft, damp
cloth. To prevent damage to the console, keep liquids
away from the console and keep the console out of
direct sunlight.
TIGHTENING THE PEDALS
For best performance, the pedals must be kept prop-
erly tightened. Regularly tighten both pedals.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 12 on page 8.
CRANK ADJUSTMENT
If the arms of the
Crank (29)
become loose,
they should be
tightened in
order to prevent
excessive wear.
Loosen the
crank nut on the
left arm of the
Crank. Place the
end of a stan-
dard screwdriver in one of the slots in the slotted
bearing nut. Lightly tap the screwdriver with a ham-
mer to turn the slotted bearing nut counterclockwise
until the arms are no longer loose. Do not overtight-
en the slotted bearing nut. When the slotted bearing
nut is properly tightened, tighten the crank nut.
HOW TO STORE THE PROFORM ¨ 965R
When the PRO-
FORM
¨ 965R is
not in use, the
Seat Frame (3)
can be adjusted
to the storage
position. First,
loosen the Lock
Knob (68) on the
right side of the
Frame (1). Slide
the Seat Frame
(3) into the
Frame as far as
possible. Tighten the Lock Knob. Store the PROFORM
¨
965R indoors, away from moisture and dust.
MAINTENANCE AND STORAGE
Crank
Nut
Slotted
Bearing
Nut
29
68
3
1