ProForm PFEX33790 - Manual (Page 6)

6
6. Finish attaching the Handlebar (4) to the Upright (2)
with two additional M6 x 25mm Hex Screws (14)
and M6 Split Washers (67). Tighten all four Hex
Head Screws.
7. Attach the Seat Bracket (69) to the Seat Frame (3)
with four M6 x 48mm Button Bolts (70) and four M6
Flat Washers (34).
8. Attach the Seat (16) to the Seat Bracket (69) with
four M6 x 16mm Phillips Screws (24).
69
69
3
70
34
34
70
24
24
16
14
14
2
4
6
7
67
67
5. Connect the Reed Switch Wire (13) to the wire on
the Console (8).
Next, attach the Console (8) to the Upright (2) with
four #8 x 5/8Ó Screws (22).
Press the Resistance Knob (9) onto the Resistance
Control (10). Be sure that the mark on the Knob is
correctly aligned.
Console
Wire
10
8 9
13
2
22
22
5
8