Philips Lightolier LX Series - Manual

LX Series
H
EAVY
D
UTY
LED E
XIT
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
of the exit stencil face is
accomplished with either
red or green high-output
Light Emitting Diodes (LEDs).
Hot spots and striations are
eliminated by a combination
of indirect and direct aiming
points covering the exit stencil
face.
Housing: Constructed of
three-piece, 20 gauge, cold
rolled steel. White powder
coat finish is standard, black
is optional. NFPA-compliant
field-selectable chevrons. UL
damp location listing is available
on the AC Only version.
Universal knockouts located
on the backplate allow for wall
mounting directly to standard
junction boxes. A mounting
canopy is provided for top and
end mount applications.
Operating Temperature
Range: Standard Location
65°F (19°C) to 85°F (30°C)
Damp Location
50°F (10°C) to 104°F (40°C)
Electronics: AC Only -
120/277 VAC dual voltage
input.
Self-Powered - 120/277 VAC
dual voltage input with surge-
protection, solid-state circuitry
provides for a reliable charging
system. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
AC Only Red:
0.030 A (120 VAC)
0.013 A (277 VAC)
AC Only Green:
0.035 A (120 VAC)
0.015 A (277 VAC)
Self-Powered Red:
0.037 A (120 VAC)
0.016 A (277 VAC)
Self-Powered Green:
0.037 A (120 VAC)
0.016 A (277 VAC)
Code Compliance
UL 924 listed. Optional UL
damp location (AC only
versions) listed. NFPA 101,
NEC, BOCA, OSHA and IBC
illumination standards.
Warranty
Three year full electronics
warranty. Five year full,
five year prorated battery
warranty.
12.5"
(31.8 cm)
LXN1RW
7.8"
(19.9 cm)
6.8"
(17.3 cm)
2.0"
(5.1 cm)
4.8"
(12.2 cm)
2.5"
(6.4 cm)