Message transfer, 1 how this feature works, 2 recording your transfer greeting message – Panasonic KX-FT901BX User Manual

Page 45

Advertising
background image

8. Answering Device (KX-FT907 only)

45

Message transfer

8.5 Transferring recorded
messages to another
telephone

This feature allows your unit to call a designated
telephone number each time a caller leaves a
message. You can then listen to the transferred
message via remote operation.

Important:

L

To use this feature, program the transfer
telephone number first (feature #60, page
50)
and set the unit to TAD/FAX mode.

L

You must turn ON the voice guidance
feature (feature #47, page 49) or recor
d
your own transfer greeting message
beforehand.

8.5.1 How this feature works

1

An incoming voice message is recorded in
your unit while you are out.

2

Your unit calls the transfer telephone
number.

3

You answer the call at the transfer telephone.

4

Your unit will play the pre-recorded transfer
greeting message.

L

If you recorded your own transfer greeting
message, it will be played instead.

5

You enter the remote operation ID, and
retrieve the message using remote operation
(page 43).

8.5.2 Recording your transfer
greeting message

The recording time is limited to 16 seconds.

Sample message: “This is a transferred
message from (your name, business and/or
telephone number). Please enter your remote ID
for remote operation.”

1

Press {MENU}.

2

Press {#}, then {6}{1}.

3

Press {SET}.

4

Press {A} or {B} repeatedly to select

RECORD”.

5

Press {SET}.

6

Speak clearly about 20 cm away from {MIC}.

L

The display will show the remaining
recording time.

7

To stop recording, press {STOP}.

L

The unit will repeat your message.

8

Press {MENU}.

To check the transfer greeting message

1. Press {MENU}, {#}{6}{1}, then {SET}.

2. Press {A} or {B} repeatedly to select

CHECK”.

3. Press {SET}.

L

The unit will play the message.

4. Press {MENU}.

To erase your transfer greeting message

1. Press {MENU}, {#}{6}{1}, then {SET}.

2. Press {A} or {B} repeatedly to select

ERASE”.

3. Press {SET}.

4. Press {MENU}.

Note:

L

When transferring a message, the pre-
recorded transfer greeting message will be
played.

L

If the voice guidance feature is turned OFF
(feature #47, page 49) and you have erased
your own transfer greeting message, the
message transfer feature will be cancelled.

FT-901-903-907BX.book Page 45 Monday, March 29, 2004 10:03 AM

Advertising
This manual is related to the following products: