Programmable features 49 – Panasonic KX-FT901BX User Manual

Page 49

Advertising
background image

9. Programmable Features

49

Code #41: Changing the fax activation code

FAX ACTIVATION

If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {SET}.

4. Press {A} or {B} repeatedly to select “

ON”.

5. Press {SET}.

6. Enter your code (2–4 digits) using the dial

keys 0–9, {*} and {#}.

L

The default code is “@

#9”.

L

Do not enter “0000”.

7. Press {SET}.

8. Press {MENU}.

Code #42 (KX-FT907 only): Setting the
message alert

MESSAGE ALERT

To alert you when new voice messages are
recorded. The unit beeps slowly until you listen
to the recorded messages.

ON”: You will be alerted to new messages by a

beeping sound.

OFF” (default): Deactivates this feature.

Code #43 (KX-FT907 only): Setting the
recording time alert

REC. TIME ALERT

To alert you when there is less than 60 seconds
of remaining recording time. The slow beeps will
continue until you erase the recorded messages
(page 42) or print out the documents in memory.

ON”: You will be alerted that you have reached

the recording time limit by a beeping sound.

OFF” (default): Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).

ON” (default): You do not have to press

{

FAX/START} for fax reception.

OFF”: You have to press {FAX/START} for fax

reception.

Code #47 (KX-FT907 only): Setting the voice
guidance

VOICE GUIDANCE

If you wish to hear voice guidance, activate this
feature.

ON” (default): You will hear the friendly reception

voice guide, pre-recorded messages and voice
time/day stamp.

OFF”: Deactivates this feature.

Code #49: Setting the auto disconnection

AUTO DISCONNECT

To answer a call with an extension telephone in
TEL/FAX mode (page 36), activate this feature
and program the code.

1. Press {MENU}.

2. Press {#}, then {4}{9}.

3. Press {SET}.

4. Press {A} or {B} repeatedly to select “

ON”.

5. Press {SET}.

6. Enter your code (2–4 digits) using the dial

keys 0–9 and {*}.

L

The default code is “@

0”.

7. Press {SET}.

8. Press {MENU}.

Code #54 (KX-FT907 only): Changing the
recording time for your TAD/FAX greeting
message

GREETING TIME

16s” (default): Maximum recording time is 16

seconds.

60s”: Maximum recording time is 60 seconds.

See page 40 for details.

Code #58: Setting the original mode

ORIGINAL

To send or copy a document with faint or dark
writing, set this feature before transmission or
copying.

NORMAL” (default): Used for normal writing.

LIGHT”: Used for faint writing.

DARKER”: Used for dark writing.

Code #59: Setting the print contrast

PRINT CONTRAST

To adjust the darkness of received or copied
documents.

NORMAL” (default): Normal contrast.

FT-901-903-907BX.book Page 49 Monday, March 29, 2004 10:03 AM

Advertising
This manual is related to the following products: