Panasonic VL-G201 - Manual (Page 22)

22
Introduction and Installation
4
Mount the monitor station to the mounting bracket.
Push the monitor station down until it is secure.
5
Take out the AC adaptor and the DC terminal from the case.
L Push the arrow mark on the front case, then release from the rear case.
L
Take out the cardboard and wood screws. The wood screws are necessary when
attaching the AC adaptor and the DC terminal to a wall (page 24).
1
2
AC adaptor
DC terminal
Arrow mark
G201CE(E).book Page 22 Friday, November 11, 2005 4:46 PM