Panasonic VL-G201 - Manual (Page 38)

38
General Information
Technical data about this product
Monitor station
Power supply: 24 V DC
Current consumption: Standby: Approx. 37 mA
At operation: Approx. 420 mA
Dimensions: Approx. height 136 mm x width 136 mm x depth 32 mm
Mass (Weight): Approx. 350 g
Operating environment: 0 °C to 40 °C, Up to 90% RH
(Relative Humidity) non condensing
Installation method: Wall mount (Wall mount bracket included)
External material: Flame retardant ABS resin (panel: acrylic resin)
Note:
L
To connect to a Door Opener, make sure the Door Opener is:
– Normal open (Low active)
– Less than 30 V AC (1 A), 24 V DC (1 A)
Door station
Power supply *1 : Standby: Approx. 5 V DC (2 mA)
At operation: Approx. 20 V DC (180 mA)
Dimensions: Approx. height 165 mm x width 90 mm x depth 35 mm
Mass (Weight): Approx. 330 g
Operating environment: – 10 °C to 50 °C, Up to 90% RH
(Relative Humidity) non condensing
Installation method: Wall mount (Wall mount bracket included)
External material: Aluminum
*1 Supplied from the monitor station.
AC adaptor (Part number: PFAP1014)
Power supply: 100 V – 240 V AC, 50 Hz / 60 Hz
Output voltage: 24 V DC
Output current: 2 A
Dimensions: Approx. height 120 mm x width 60 mm x depth 35 mm
Mass (Weight): Approx. 310 g
Operating environment: 0 °C to 40 °C, Below 90% RH
(Relative Humidity) non condensing
External material: PC + ABS
G201CE(E).book Page 38 Friday, November 11, 2005 4:46 PM