Set sleep timer, Adjust display brightness, Listen to external audio device – Philips AJB1002/79 User Manual
Page 17
Set sleep timer
The unit can switch to standby mode automatically after a period.
1
Press SLEEP repeatedly to select time period.
»
is displayed.
The volume decreases gradually in the last 5 minutes.
»
To turn off the sleep timer:
1
Press SLEEP repeatedly until [Sleep off] is displayed.
»
disappears.
Adjust display brightness
1
Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly
to select different brightness levels of the display:
Full brightness
•
Half brightness
•
Backlight off
•
Listen to external audio device
With this unit, you can enjoy audio from an external device.
1
Connect the supplied MP3 link cable to:
the
•
MP3-LINK socket on the back of this unit
the output socket of the external device.
•
2
Press SOURCE repeatedly to select MP3-LINK.
»
[MP3-Link] is displayed.
3
Press - VOLUME + repeatedly to adjust volume.