Panasonic KX-FP151E - Manual (Page 71)

Features Summary
69
#67
■ For KX-FP155 only:
Setting the incoming message
monitor
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
ICM MONITOR
=ON
[±]
ON
OFF
If you select “OFF”, you cannot
monitor the incoming message.
#68
Setting the Error Correction
Mode (ECM)
To send a fax even if there is static
interference on the telephone line.
ECM SELECTION
=ON
[±]
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
● If received documents are in
memory, follow the display
message to solve the problem
and print out the documents in
memory before changing the
setting.
After the setting is changed, the
documents in the memory will be
erased.
See page 45 for details.
#70
Calling your pager
Activate this feature if you have a
pager and wish to know when your
unit receives the following:
— KX-FP151: a fax document.
— KX-FP155: a fax document or an
incoming voice message.
PAGER CALL
=OFF
[±]
FAX PAGER CALL
=OFF
[±]
ON
OFF
Code Feature & Display Settings How the unit operates
You can confirm the status of the
other party’s machine.
● If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
● The connecting tone volume
cannot be adjusted.
#76
Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
=ON
[±]
ON
OFF
(The default setting is in bold type.)
(KX-FP151)
(KX-FP155)
KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 69