Error messages, Reports, Display – Panasonic KX-FP151E User Manual

Page 73

Advertising
background image

There is something wrong with the unit. Contact our service
personnel.

CALL SERVICE2

CALL SERVICE

Cause & solution

71

Error Messages

Reports

!

If your unit cannot send a fax, check the following:
— the number you dialled is correct,
— the other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the
sending and journal reports (p. 31).

COMMUNICATION ERROR

(CODE: 40–42, 46–72, FF)

A transmission or reception error occurred.
Try again or check with the other party.

COMMUNICATION ERROR

(CODE: 43, 44)

A line problem occurred. Connect the
telephone line cord to a different jack and
try again.

An overseas transmission error occurred.
Try using the overseas mode of feature
#23 (p. 64).

DOCUMENT JAMMED

The document is jammed. Remove the
jammed document (p. 78).

ERROR-NOT YOUR UNIT

(CODE: 54, 59, 70)

A transmission or reception error occurred
because of a problem with the other
party’s fax machine. Check with the other
party.

MEMORY FULL

The document was not received due to
memory being full.

NO DOCUMENT

The document was not fed into the unit
properly. Reinsert the document and try
again.

OTHER FAX NOT RESPOND

The other party’s fax machine is busy or
has run out of recording paper. Try again.

The document was not fed properly.
Reinsert the document and try again.

The other party’s fax machine rings too
many times. Send the fax manually
(p. 30).

The other party’s machine is not a
facsimile. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

{

was pressed and fax

communication was cancelled.

OK

Fax communication was successful.

Display

!

If the unit detects a problem, one or more of the following messages will appear on the display.

Display message

The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 79) and try again.

CHECK DOCUMENT

KX-FP151/155(E)(071-076) 01.12.19 10:05 AM Page 71

Advertising