Panasonic SC-PT673 - Manual (Page 17)

17
RQ
TX02
10
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
Preparation
≥ To display the picture, turn on the TV and select the appropriate video
input mode.
≥ Press [i, ` VOL] to adjust the volume to normal listening level.
≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
( B 29).
(Effective when playing 5.1-channel sound or when “ ÎPLII” lights.)
Selecting sound mode
1 Select a sound mode.
Each time you press the button:
EQ:
Equalizer
SUBW LVL: Subwoofer Level
C.FOCUS: Center Focus
2 While the selected
mode is displayed Make settings.
Refer to the followings for setting details of
each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [
2, 1]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit automatically
selects the most suitable setting according to the type of
playback source.
SUB W 1
,# SUB W 2 ,# SUB W 3 ,# SUB W 4
^-------------------------------------------------------------------J
≥ The setting you make is retained and recalled every time you
play the same type of source.
Center Focus
(Effective when playing audio containing center channel
sound or when “
ÎPLII” lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS O
N ,------.C.FOCUS OFF
Whisper-mode Surround
≥ “(( ))” lights when there is effect.
Each time you press the button:
WHISPER-MODE SRD ON

WHISPER-MODE SRD OFF
SOUND
W.SRD
Adjusting the speaker output level manually
1 Enter test tone mode.
Test tone will be output to each channel in
the following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2 Adjust the speaker level for each
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP].
To adjust speaker level during play
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L # C# R# RS# LS# SW
^----------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and “ ÎPLII” is not lit.
≥ “S” appears on the main unit’s display when you have selected
“S.SRND” ( B 16, Enjoying surround sound effects). In this case,
you can adjust both surround speaker levels at the same time using
[
3, 4].
S: `6 dB to i6 dB
2 Press [ 3] (increase) or [4] (decrease) to adjust the speaker level
for each speaker.
C, RS, LS, SW:
`6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected,
press [
2, 1].
OK
e.g.
SET
RETURN
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
EXIT : SETUP
OK
RQTX0210-1P_670-673_Eng.book Page 17 Friday, April 3, 2009 2:48 PM