Panasonic SC-PT673 - Manual (Page 23)

23
RQ
TX02
10
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
Confirming HDMI information
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (B above, VIDEO FORMAT)
5 (B above, COLOR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (
B 29, HDMI menu), “– – –” will
be displayed in “AUDIO STREAM”.
ROTATION
To rotate a picture (during pause)
[JPEG]:
0
,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1:
CINEMA2:
DYNAMIC:
ANIMATION:
Mellows images and enhances
detail in dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO (
[DVD-VR] [DVD-V] [VCD]), k2, k4
≥ [JPEG]: during pause
TRANSFER
MODE
If you have chosen “480p”/“720p”/“1080p”
(progressive), “1080i” (interlaced)
[“VIDEO FORMAT” in Menu 4 (HDMI)] or
“PROGRESSIVE” under “VIDEO OUT (I/P)”
(
B 28, VIDEO menu), select the method of
conversion for progressive output to suit the type
of material.
≥ The setting will return to “AUTO1” when the
disc tray is opened, the unit is turned off or
another source is selected.
AUTO1:
AUTO2:
VIDEO:
Automatically detects the film and
video content, and appropriately
converts it.
In addition to “AUTO1”,
automatically detects film
contents with different frame rates
and appropriately converts it.
Select if the video content is
distorted when using “AUTO1” or
“AUTO2”.
Menu 3 (Audio)
DIALOGUE
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
To show HDMI information.
(
B below, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
B 29, HDMI
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p”
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
B 29, HDMI
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
§ 480p/720p/1080p (progressive)
§ 480i/1080i (interlaced)
≥ If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to “480p”.)
§ The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
COLOR SPACE
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
B 29, HDMI
menu) set to “ON”.
To select suitable picture color with your TV
YCbCr 4:2:2 §
– Luminance and color details are sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible with all TV
models.
YCbCr 4:4:4 §
– All color details are sent. Luminance and
color details are in the same signal.
RGB
– Component video type of signal.
≥ If the setting above is not compatible with your
TV, it will not be displayed.
§ Terms are descriptions of the sample formats
used in digital video. YCbCr is a video signal
for luminance (Y), blue (Cb) and red (Cr)
details.
e.g.
HDMI
HDMI --- INFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOR SPACE CONNECTED
PCM
2ch
720p
YCbCr 4:4:4 1
2
3
4
5
RQTX0210-1P_670-673_Eng.book Page 23 Friday, April 3, 2009 2:48 PM