Panasonic DMC-LS75 User Manual

Page 60

Advertising
background image

60

VQT1C84

Advanced-Shooting

Setting the white balance manually

(White set |)

Use this to set the white balance manually.
1 Select [|] (White set) and then

press [MENU/SET].

2 Aim the camera at a sheet of white

paper or a similar white object so that
the frame on the centre of the screen
turns white and then press [MENU/SET].

3 Press [MENU/SET] twice to close the

menu.

• You can also press the shutter button

halfway to fi nish.

• The white balance may not be correct if

the subject is out of fl ash range.

• The white balance you set is saved

even if you switch the camera off, but if
you change the scene mode, the white
balance setting returns to [AWB].

• The white balance cannot be set in the

following cases:
– In simple mode [

]

– [SCENERY], [NIGHT SCENERY],

[NIGHT PORTRAIT], [FOOD],
[PARTY], [CANDLE LIGHT],
[SUNSET], [FIREWORKS], [BEACH],
[STARRY SKY], [SNOW], or [AERIAL
PHOTO] in scene mode (P46)

[SENSITIVITY]

Setting the light sensitivity

ISO sensitivity represents the sensitivity
of the image sensor to light. If you set
the ISO sensitivity higher, the camera
becomes more suitable for recording in
dark places.
• When setting to [AUTO], the ISO

sensitivity is automatically adjusted to a
maximum of [ISO400] according to the
brightness. (When using the fl ash, the
adjustment range becomes a maximum
of [ISO640].)

ISO sensitivity

100

1250

Use in bright
places
(e.g. outdoors)

Suitable

Not
suitable

Use in dark
places

Not
suitable

Suitable

Shutter speed

Slow

Fast

Noise

Less

More

• The ISO sensitivity is fi xed to [ISO3200]

in [HIGH SENS.] (P50) in scene mode.

• To avoid picture noise we recommend

reducing the ISO sensitivity or setting
[COL.MODE] to [NATURAL]. (P65)

• If the camera is in Intelligent ISO mode

(P44), the screen changes to the one for
[ISO LIMIT].

• The ISO sensitivity cannot be set in the

following cases:
– In simple mode [

]

– In motion picture mode [

i]

– In scene mode

MENU

WHITE SET

CANCEL SET

MENU

SET

Press [

] to display the [REC] mode menu and select the item to set. (P18)

J

Advertising
This manual is related to the following products: