Panasonic DMC-LS75 User Manual

Page 64

Advertising
background image

64

VQT1C84

Advanced-Shooting

• The stabilizer function may not work in

the following cases so take special care
not to move the camera when pressing
the shutter button.
– When too much jitter occurs.
– When the zoom magnifi cation is high.
– In digital zoom range.
– When taking pictures while following

subjects in motion.

– When the shutter speed is extremely

slow due to dark conditions or other
reasons.

• In simple mode [

], the setting is fi xed

to [MODE2] and in [STARRY SKY] (P50)
in scene mode it is fi xed to [OFF].

• In motion picture mode [

i], [MODE2]

cannot be set.

[BURST]

Shooting in quick succession

• Turn this mode [ON] and when you

press and hold the shutter button several
pictures are taken in succession.

The burst speed will become slower
halfway.
When it slows down depends
on the type of card, picture size, and
quality.

• You can take pictures until the capacity

of the built-in memory or the card is full.

• Burst speed slows when ISO sensitivity

(P44, 60) is higher than [ISO400].

• Shutter speed decreases in dark places,

so burst speed may also be slower.

• The focus is fi xed in the fi rst picture.
• The camera sets the exposure and white

balance for each picture in the series.

• When panning across areas with a

large difference in brightness, the
camera takes some time to get the right
exposure. This means that the exposure
may not be correct when taking pictures
in succession.

• When the self-timer is used, the number

of recordable pictures in burst mode is
fi xed to 3.

• Burst mode is not cancelled when the

camera is switched off.

• In Burst mode, auto review is activated

even if the setting is off. You cannot
change the auto review setting in the
setup menu.

• You can only take one photograph at a

time when using the fl ash.

• You cannot take photographs in

succession when the camera is in simple
mode [

] or [STARRY SKY] in scene

mode.

MENU

SET

Press [

] to display the [REC] mode menu and select the item to set. (P18)

Advertising
This manual is related to the following products: