Pentax OptioWP - Manual (Page 156)

154
8
Settin
g
s
8
Press the 4 button.
The screen returns to the [u Setting] menu.
Check that [Alarm] is set to O (On).
9
Press the 4 button.
[Alarm is set] appears and the camera turns
off.
1
Select [Alarm] on the [u Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller (5).
The Alarm screen appears.
Check the alarm frequency and time.
3
Press the 3 button twice.
The camera is ready to take pictures.
The Clock mode screen appears and the alarm
rings for one minute when the set time is
reached while the camera is turned off.
You can stop the alarm by pressing any button
on the camera, except the shutter release
button, while the alarm is ringing.
Checking the Alarm
Turning the Alarm Off
The alarm will not ring when the set time is reached if the camera
has been turned on.
F o r m a t
S o u n d
D a t e A d j u s t
A l a r m
Wo r l d Ti m e
S e t t i n g
MENU E x i t E x i t E x i t
0 3 / 2 5 / 2 0 0 5
1 / 3
A l a r m 1 4 : 2 5
MENU C a n c e l OK O K
A l a r m O n c e
Ti m e 1 7 : 3 0