Pentax OptioWP - Manual (Page 84)

82
4
Tak
ing Pi
cture
s
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5)
in A mode.
2
Use the four-way controller (5) to
select \ and press the 4
button.
The central portion of the screen is
magnified to twice its size when focusing.
3
Press the four-way controller
(23).
The MF indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2
: for distant focus
3 : for closer focus
4
Press the 4 button.
The focus is fixed and the camera returns to capture status.
The focus position is fixed five seconds after you remove your finger
from the four-way controller (5).
• In y mode, the focus mode is set to s.
• In A mode, you can only select = and q.
• In C mode, you can only select s, 3 or \.
Saving the Focus Mode 1p.97
Manual Focus
F o c u s M o d e F o c u s M o d e F o c u s M o d e
M a n u a l F o c u s M a n u a l F o c u s M a n u a l F o c u s
OK O K O K O K
2
1m 1m
2
1m
3 8 3 8 3 8
MF indicator