Pioneer VSX-AX4AVi-G - Manual (Page 3)

TWO VOLTAGE SELECTORS
230-
240 V
120-127 V 110V
220 V
220V
230-240V 110V
120- 127V
Voltage selector
You can find the voltage selector switch on the rear
panel of multi-voltage models.
The factory setting for the voltage selector is 220V.
Please set it to the correct voltage for your country
or region.
• Saudi Arabia operates on 127V and 220V mains
voltage. Please set to the correct voltage before using.
• For Taiwan, please set to 110V before using.
• For Mexico, please set to 120-127V before using.
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
D3-4-2-1-5_En
Changing the TV format setting
If the System Setup menu is not displayed correctly, it
may be that the TV system is set incorrectly for your
country or region.
• With the receiver in standby, press STANDBY/
ON while holding down the SIGNAL SELECT button.
The display shows the new setting ( PAL or NTSC).
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period.
K041_En
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
cover_anki_1015.fm 3 ページ ２００５年７月２０日 水曜日 午前９時４８分