Pioneer VSX-AX4AVi-G - Manual (Page 56)

Other connections 08
56
En
Using the multi-room controls
The following steps use the front panel controls to adjust
the sub room volume and select sources. See
Multi-room
remote controls below
1 Press the MULTI ROOM & SOURCE ON/OFF button
on the front panel.
Each press selects a multi-room option:
• ROOM 2 ON – Selects your primary ( ROOM 2 ) sub
room.
• ROOM 2&3 ON – Select both sub rooms.
• ROOM 3 ON – Selects your secondary ( ROOM 3 )
sub room.
• Off – Switches the multi-room feature off
The MULTI ROOM indicator lights when the multi-room
control has been switched on.
2 Press CONTROL to select the sub room(s) you want. 1
If you selected ROOM 2&3 ON above, you can toggle
between ROOM 2 and ROOM 3 .
• When the receiver is on, 2 make sure that any
operations for the sub room are done while ZONE
and your selected sub room(s) show in the display. If
this is not showing, the front panel controls affect the
main room only.
3 Use the INPUT SELECTOR dial to select the source
for the room you have selected.
For example, ROOM 2 CD-R sends the source connected
to the CD-R inputs to the primary ( ROOM 2 ) sub room.
• If you select TUNER , you can use the front panel
TUNER controls to select a preset station (see Saving
station presets on page 31 if you’re unsure how to do
this). 3
4 Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the VARIABLE
volume control in Multi-Room and IR receiver setup on
page 62.
4
5 When you’re finished, press CONTROL again to
return to the main room controls.
You can also press the MULTI ROOM & SOURCE ON/
OFF button on the front panel to switch off all output to
the sub room(s).
5
Multi-room remote controls
The following table shows the possible multi-room
remote controls:
Connecting an IR receiver
If you keep your stereo components in a closed cabinet or
shelving unit, you can use an optional IR receiver (such
as a Niles or Xantech unit) to control your system instead
of the remote sensor on the front panel of this receiver.
6
You may need to specify your IR receiver type in Multi-
Room and IR receiver setup on page 62.
Note
1 Note that when recording, this also selects the RECOUT input source. See Making an audio or a video recording on page 64 for more on this.
2 If the receiver is in standby, the display is dimmed, and ZONE and your selected sub room(s) continue to show in the display.
SPEAKERS (TUNE +)
ENTER
(TUNE –)
PHONES
AV
PARAMETER
SETUP
(ST –) (ST +)
TUNER
EDIT
BAND
CONTROL ON/OFF
VIDEO
SELECT
SIGNAL
SELECT SBch
PROCESSING STEREO
VIDEO/GAME 2 INPUT
DIGITAL IN S-VIDEO VIDEO L R AUDIO
MULTI – ROOM &
SOURCE/REC SEL
MCACC
SETUP MIC
RETURN
STANDBY/ON
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-AX4AVi
PHASE CONTROL
PHASE CONTROL
MCACC POSITION AUTO SURR/ STREAM DIRECT
DIGITAL PRECISION PROCESSING
HOME THX STANDARD
SURROUND ADVANCED
SURROUND
INPUT SELECTOR MASTER
VOLUME
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one room also changes the station in the other room.
Please be careful not to change stations when recording a radio broadcast.
4 The volume levels of the main and sub rooms are independent.
5 • You won’t be able to switch the main room off completely unless you’ve switched off the multi-room control first.
• If you don’t plan to use the multi-room feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in standby.
Button What it does
SHIFT +
RECEIVER
Selects the sub room you want to control,
shown in the display as
RCV/RM2 ( ZONE /
ROOM2 ) or RCV/RM3 ( ZONE / ROOM3 ).
Switches on/off power in the currently selected
sub room.
INPUT
SELECT Use to select the input source in the currently
selected sub room.
Input
source
buttons Use to select the input source directly (this may
not work for some functions) in the currently
selected sub room.
VOL +/– Use to set the listening volume in the currently
selected sub room (
ZONE / ROOM2 only).
6 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.
VSX_AX4AVi_G.book.fm 56 ページ ２００５年７月６日 水曜日 午後４時１２分