Ipod messages, Additional information 12 – Pioneer VSX-AX4AVi-G User Manual

Page 79

Advertising
background image

Additional information

12

79

En

iPod messages

Note

• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug

from the outlet and insert again to return to normal operating conditions.

No picture.

• If your display device is not SD (480i) compatible then neither the setup screens or the 480i to HDMI
converted video will be displayed. In this case, connect using the component, S-video or composite video
jacks.
• Depending in the output settings of the source component, it may be outputting a video format that can’t
be displayed. Change the output settings of the source, or connect using the component, S-video or
composite jacks.

No sound, or sound suddenly
ceases.

• Check that the HDMI AV setting is set to

AMP/THROUGH

.

• If the component is a DVI device, use a separate connection for the audio.
• If analog video is being output over HDMI then there will be no HDMI audio output. Please use a separate
connection for the audio.
• Check the audio output settings of the source component.

Noisy or distorted picture.

• Sometimes a video deck may output a noisy video signal (during scanning, for example), or the video
quality may just be poor (with some video game units, for example). The picture quality may also depend on
the settings, etc. of your display device. Switch off the video converter and reconnect the source and display
device using the same type of connection (component, S-video or composite), then start playback again.
• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.

Symptom

Remedy

Symptom

Cause

Action

Error I1

There is a problem with the signal path from the
iPod to the receiver.

Switch off the receiver and reconnect the iPod to the receiver.
If this doesn’t seem to work, try resetting your iPod.

Error I2

The software version being used with the iPod
needs to be updated.

Update the software being used with the iPod (software
versions prior to iPod update 2004-10-20 are not supported).

No Track

There are no playable songs currently stored in
the iPod.

Input some music files compatible with iPod playback.

VSX_AX4AVi_G.book.fm 79 ページ 2005年7月6日 水曜日 午後4時12分

Advertising
This manual is related to the following products: