Accessing the easytouch motherboard – Pentair EasyTouch 8 and 4 Pool and Spa Control System User Manual

Page 20

Advertising
background image

14

EasyTouch Load Center Installation Guide

Accessing the EasyTouch Motherboard

The EasyTouch motherboard provides connectors for the auxiliary relays, valve actuators and
sensors (see page 13). To access the motherboard connectors, fold down the main control panel.

To access the motherboard connectors:

1. Loosen the two retaining screws securing from the top edge of the control panel.

2. Fold down the control panel to access the rear of the motherboard for the electrical

connections.

3. Proceed with:

Installing Auxiliary Relays, page 15
Installing the Valve Actuator, page 16
Installing and Connecting Temperature Sensors, page 17
Connecting the Heater Thermostat, page 18

4. After electrical connections have be completed, close the control panel and tighten the two

retaining screws.

Control panel
(fold down to access
motherboard)

Retaining

screw

Retaining
screw

Advertising