Ip dscp priority table, Ip dscp configuration example, Dscp configuration example – Patton electronic COPPERLINK 2160 User Manual
Page 58
Advanced Configuration Options
58
Model 2160 Series User Manual
4 • Web configuration
IP DSCP Priority Table. Select the queue for each DSCP level. Each DSCP value (from 0 to 63) is mapped
to a Queue value (from 0 to 3) from the drop-down list The number 0 represents the lowest priority and num-
ber 3 represents the highest priority and according various queuing strategies to tailor performance to require-
ments.
Figure 38. QoS - IP DSCP Priority page
IP DSCP Configuration Example. In this example, the selected operation
is Type 3. For the Type 3 combination,
s
et up Queue 1 and Queue 2 for
WFQ configuration.
For this example, assume the following actions:
•
Assign DSCP 1 to Queue 0.
•
Assign DSCP 14 to Queue 1.
•
Assign DSCP 34 to Queue 2.
•
Assign DSCP 55 to Queue 3.
shows the results of the configuration for the LAN 1 port.
Figure 39. DSCP Configuration Example