Patton electronic COPPERLINK 2160 - Manual (Page 76)

Setup Command Menu 76
Model 2160 Series User Manual 5 • Console and Telnet configuration
Setup Command Menu
The setup command menu lists commands for initially configuring the Model 2160. Move the cursor “ >>” to
setup in the main menu and press Enter.
When you enter the setup command, the following menu displays:
Line
The line command menu lists commands for setting up the line port. Move the cursor “ >>” to line in the
setup menu and press Enter. The following menu displays:
Table 15 shows the options available within the line command menu:
>> line Configure line parameters
lan Configure LAN interface profile
vlan Configure virtual LAN parameters
qos Configure Quality of Service parameters
rate Configure Rate Control parameters
Manage-
ment Configure management interface profile
dhcp Configure DHCP parameters
dns_proxy Configure DNS proxy parameters
hostname
Configure local host name
default Restore factory default settings
>> mode Configure line mode
link Configure line link
annex Configure line annex type
tcpam Configure line TCPAM type
maxMainRate Configure line max main data rate
snrMargin
Configure line SNR margin
lineProbe Configure line line probe
clear Clear current CRC error count
Table 15. Line Options
Menu Options
Mode STU-C STU-R
Link Type 2-wire 4-wire 8-wire
Annex AF BG
TCPAM Auto TCPAM-16 TCPAM-32 TCPAM-64
Max Main Rate (3–89)
SNR Margin
(-10–21)
Line Probe Disable Enable