Connections, Econnecting to 7.1ch audio out terminal – Panasonic DMP-BD55 User Manual

Page 12

Advertising
background image

RQT9243 or RQT9350

12

Connections

Connections using a surround sound receiver/amplifier

D

Installation using the HDMI connection

“HDMI Video Mode” and “HDMI Audio Output”
should be set to “On”. (

>

32)

“Digital Audio Output” : Depending on the
connected amplifier/receiver. (

>

31)

The HDMI connection supports VIERA Link
“HDAVI Control” (

>

26) when used with a

compatible Panasonic TV.

This unit comes equipped with a Dolby Digital
Plus, Dolby TrueHD and DTS-HD decoder.
When an amplifier/receiver with 7.1ch
speakers that supports HDMI (High Bit rate
Audio) is connected using High Speed HDMI
cable, you can enjoy surround sound
recorded with Dolby Digital Plus, Dolby
TrueHD or DTS-HD. (

>

8)

E

Connecting to 7.1ch AUDIO OUT terminal

[BD55]

“Analog Audio Output” should be set to
“7.1ch”. (

>

32)

This unit comes equipped with a Dolby Digital
Plus, Dolby TrueHD and DTS-HD decoder.
When connected to a compatible amplifier/
receiver using the 7.1ch AUDIO OUT
terminals, you can enjoy surround sound
recorded with Dolby Digital Plus, Dolby
TrueHD or DTS-HD.

When connecting amplifier/receiver or other
devices with HDMI AV OUT terminal, set
“HDMI Audio Output” to “Off”. (

>

32)

(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may be output as two channels
only.)

When connecting a TV (

>

11,

A

) with HDMI

AV OUT terminal, set “HDMI Audio Output” to
“Off”. (

>

32)

(Otherwise, the sound may not be output with
the desired audio.)

Depending on how the disc was recorded, the
audio may not be output properly on the
number of channels desired.

Cable connections

a

Surround back speaker (L/R)

b

Front speaker (L/R)

c

Surround speaker (L/R)

d

Center speaker

e

Subwoofer

HDMI IN

Multi channel speakers

HDMI cable

HDMI compatible
amplifier/receiver

Back of the unit

HDMI
compatible
television

HDMI IN

HDMI OUT

Connect Audio
cables
to
terminals
corresponding to
the speakers you
have connected.

Back of the unit

Amplifier/receiver with
7.1ch AUDIO IN

Multi channel speakers

DMP-BD55_35PP-RQT9243_ENG.book 12 ページ 2008年8月29日 金曜日 午前10時28分

Advertising