Panasonic DMP-BD55 - Manual (Page 31)

RQT9243 or RQT9350
31
To select these options, perform steps 1 – 4 ( > 30)
“Video”
Still Mode (paused video) [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback
(
> 46, Frames and fields).
≥ Auto
≥ Field: Select if jittering occurs when “Auto” is selected. (The picture
is coarser.)
≥ Frame: Select if small text or fine patterns cannot be seen clearly
when “Auto” is selected. (The picture is clearer and finer.)
Seamless Play [DVD-VR]
Select the play mode between playlist chapter segments and partially
deleted titles.
≥ On: The chapters in playlists are played seamlessly. This does
not work while searching or when there are several audio
types included on the playlist. Additionally, the positioning of
chapter segments may change slightly.
≥ Off: The points where chapters in playlists change are played
accurately, but the picture may freeze for a moment.
Black Level Control
Select lighter or darker for adjusting the black level control to the
desired setting for picture enhancement.
≥ Lighter: When video is output from VIDEO OUT terminal.
≥ Darker: When video is output from COMPONENT VIDEO OUT
terminal.
“Audio”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (
> 46) for late night viewing.
≥ On ≥ Off
≥ Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output ( > 8)
≥ Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in “Bitstream” or
“PCM” format.
≥ Not making the proper settings may
result in noise.
≥ If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected in these
items may not be output (e.g., when
a television is connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
≥ Bitstream:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
– Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
≥ PCM:
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether or
not they can decode each of the audio formats.
DTS/DTS-HD
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
> 21)
≥ On: The primary audio and secondary audio are mixed and output. The
sampling frequency is converted to 48 kHz.
≥ Off: The clicking sound on the menu and secondary audio are not
output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
more.
≥ Signals are converted to 48 kHz despite the settings across in
the following cases:
– when the signals have a sampling frequency of over 96 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
≥ On: Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
≥ Off: Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥ When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is
set to “Bitstream”, there are no downmix effects for the outputted
audio.
≥ The audio will be outputted in “Stereo” in the following cases.
– AVCHD playback
– Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
≥ Stereo: When connected to equipment that does not support
the virtual surround function.
≥ Surround encoded: When connected to equipment that supports the
virtual surround function (Dolby Pro Logic, DTS
Neo: 6, etc.).
S
e
tti
n
g
s
DMP-BD55_35PP-RQT9243_ENG.book 31 ページ ２００８年８月２９日 金曜日 午前１０時２８分