Philips 27DVCR55S - Manual (Page 47)

• If you enter the wrong code in the
CONFIRM CODE space, repeat
step 5. Enter the same new code
exactly in the CONFIRM CODE
space.
• If you unplug the power cord or if
the power fails, the default code
will be active again (0000).
Change your access code again as
necessary.
Helpful Hints
Setting V-Chip (cont’d) 47
Changing the Access Code
Although the default code 0000 is supplied with the
TV/VCR/DVD, you can set your own access code.
1 Press SETUP.
2 Press ▲ or ▼ to select V-CHIP SET UP.
Then, press ENTER.
3 Press the Number buttons to enter the old
access code. When doing this for the first time, use
0000. Four Xs will appear instead of the code to pro-
tect its identity.
4 Press ▲ or ▼ to select CHANGE CODE.
Then, press ENTER.
5 Press the Number buttons to enter your pre-
ferred access code in the NEW CODE space.
Then, enter the same code in the CONFIRM
CODE space. Again, Xs will appear instead of the
code numbers. The access code must have exactly four
digits.
The V-CHIP SET UP screen will reappear.
6 Press SETUP to save your settings and
remove the menus.
NEW CODE
CONFIRM CODE
X X X X
– – – –
– V-CHIP SET UP –
TV RATING
MPAA RATING
CHANGE CODE
B
ACCESS CODE
– – – –
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURN TITLE SETUP
A-B
REPEAT SEARCH MODE CLEAR
MODE ANGLE SUBTITLE AUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECT SLEEP
CH.
VOL.
MUTE
ZOOM
1 2 3
4 5 6
7 8 9
0 +10
+100
REPEAT
PHILIPS
2,4
1,6
3,5