Philips 27DVCR55S - Manual (Page 54)

54 Track Play
There are three ways to play a Track on an Audio CD. Use
the Number buttons, the SEARCH MODE button, or
i
/g and j/h .
● Before you begin, press SELECT to put the
TV/VCR/DVD in DVD mode. Make sure an Audio
CD is in the disc tray.
A
Using the Number Buttons
Press the Number buttons to enter a Track number.
Play will start at the selected Track.
For single-digit Tracks (
1-9), press a single Number button.
For Tracks 10 and above, press the +100/+10 button so the
Search display (TR - - ) appears on the TV. Press the Number
button of the first digit, then press the Number button of the
second digit. For example, to play Track 26, press +100/+
10,
then Number 2, then Number 6.
If you enter a Track number that is not available on the Disc,
play will not begin (or the current Track will continue to play).
B
Using SEARCH MODE
Press SEARCH MODE so the Track Search display
(TR) appears. Within 30 seconds, press the Number
buttons to select the Track number. Play will begin at
the selected Track. For a single-digit Track (
1-9), enter a zero
first. For example, to play Track 5, press 0, 5. You do not
have to use the +
100/+10 button in Search Mode for Tracks
10 and above.
C
Using i/g and j/E
During play, press i/g to skip the current Track
and move to the next Track. Press j/h to
return to the beginning of the current Track or to
go to previous Tracks.
• The H/h and G/g
buttons are not active when play
is stopped.
• You cannot use G/g to go
from the last Track on the Disc
to the first Track.
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURN TITLE SETUP
A-B
REPEAT SEARCH MODE CLEAR
MODE ANGLE SUBTITLE AUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECT SLEEP
CH.
VOL.
MUTE
ZOOM
1 2 3
4 5 6
7 8 9
0 +10
+100
REPEAT
PHILIPS
B
A-B
C
Helpful Hints